High-roubustness keystroke recognition method based on acoustic spatial gradient

For the fluctuation of CFCC caused by environmental noise is the main reason for the low accuracy of keystroke detection,the spatial characteristics of adjacent between CFCC were studied,and the spatial gradient structure of CFCC based on points was established.On this basis,the effect of CFCC spatial gradient on keystroke content recognition and the selection of precise neighborhood points were studied on training and testing.Finally,a high-robustness keystroke recognition algorithm based on acoustic signals was constructed.Extensive experiments in different environments demonstrate that the proposed CFCC spatial gradient sound feature achieves great performance and the recognition accuracy is 96.15%.     

基于Marr小波改进的SIFT算法的遥感影像配准

〖HTH〗通讯作者〖HTSS〗:[ZK（]金〓燕(1991-)，女，山东济宁人，硕士研究生，主要从事图形图像处理，图像与视觉信息计算方面的研究。E\|mail:jyan0529@163.com。[ZK）] 〖ZW)〗〖HT〗 〖AM〗〖HT5SS〗〖MM(〗〖ZZ(S〗〖HT5”〗〖SX(B〗第34卷〓第3期〖〗2019年6月〖SX)〗[KG0.2mm]〖KG7*3〗〖HT〗〖SX(B〗遥〓感〓技〓术〓与〓应〓用〖〗〖WT5，6〗REMOTE SENSING TECHNOLOGY AND APPLICATION〖SX)〗〓〓〓〓〖KG6*2〗〖WT5”BX〗〖SX(B〗Vol.34〓No.3〖〗Jun.2019〖WT〗〖SX)〗〖ZZ)〗〖MM)〗〖HT〗 〖HT2H〗〖JZ(〗〖WTHZ〗〖STHZ〗 基于Marr小波改进的SIFT算法的遥感影像配准 〖STBZ〗〖WTBZ〗〖HT4K〗 张海涛，金〓燕，刘万军 〖HT5K〗 (辽宁工程技术大学 软件学院，辽宁 葫芦岛〓125105) 〖JZ)〗〖ＨＴ５Ｈ〗〖GK2!2〗摘要〖HTK〗: [KG(0.1mm]针对遥感图像配准方法中错误匹配点对过多、配准效率低和其他性能，提出了一种基于小波的遥感图像配准方法。首先，利用尺度空间理论下的Marr小波对参考图像和待配准图像进行特征提取，然后利用欧氏距离对参考图像和待配准图像的特征点进行初配准，再根据随机采样一致法，对初配准结果进行精配准。为了验证方法的有效性，选择无人机实时航拍图像、不同时相变化遥感图像以及遥感不同高度的遥感图像。实验结果表明：该方法与SIFT(Scale Invariant Feature Transform)算法以及其他改进SIFT算法相比可以有效剔除错误匹配点对，提高了配准精度，同时提高配准效率两倍以上。该方法可以应用于不同遥感数据源，能够有效地提高配准精度，降低配准时间。[KG)] 〖ＨＴＨ〗关〓键〓词〖ＨＴ５Ｋ〗: 遥感图像配准;Marr小波;欧氏距离;随机采样一致法 〖ＨＴＨ〗中图分类号〖HTSS〗:TP79〓〓〖HTH〗文献标志码〖HTSS〗:A〓〓〖HTH〗文章编号〖HTSS〗:1004 0323(2019)03 0622 08 〖HK〗〖HT5SS〗     

A mechanism informed neural network for predicting machining deformation of annular parts

Controlling machining deformation of annular parts is crucial for ensuring the performance of high value products and equipment. For example, during manufacturing of critical parts in aircrafts and spacecrafts, accurate prediction of machining deformation is the basis for guiding the formulation of deformation control strategies. However, due to the complexity of the machining deformation of annular parts, existing methods still have limitations in accurate prediction. To this end, this paper proposes a mechanism informed neural network (MINN) to predict machining deformation of annular parts. MINN is realized by establishing the dual sub-networks structure and using enhanced loss functions with the consideration of the deformation mechanism model characteristics of annular parts. The deformation was decomposed into the axisymmetric portion and the non-axisymmetric portion according to the deformation superposition principle, and modeled separately based on the thin-shell theory and Fourier series. Experiment results showed that the proposed method could predict the machining deformation of annular parts more accurately and stably with a small amount of training data, compared with previous methods.     

结合深度学习与相关反馈的遥感图像检索

目的 针对基于内容的图像检索存在低层视觉特征与用户对图像理解的高层语义不一致、图像检索的精度较低以及传统的分类方法准确度低等问题，提出一种基于卷积神经网络和相关反馈支持向量机的遥感图像检索方法。方法 通过对比度受限直方图均衡化算法对遥感图像进行预处理，限制遥感图像噪声的放大，采用自学习能力良好的卷积神经网络对遥感图像进行多层神经网络的监督学习提取丰富的图像特征，并将支持向量机作为基分类器，根据测试样本数据到分类超平面的距离进行排序得到检索结果，最后采用相关反馈策略对检索结果进行重新调整。结果 在UC Merced Land-Use遥感图像数据集上进行图像检索实验，在mAP（mean average precision）精度指标上，当检索返回图像数为100时，本文方法比LSH（locality sensitive Hashing）方法提高了29.4%，比DSH（density sensitive Hashing）方法提高了37.2%，比EMR（efficient manifold ranking）方法提高了68.8%，比未添加反馈和训练集筛选的SVM（support vector machine）方法提高了3.5%，对于平均检索速度，本文方法比对比方法中mAP精度最高的方法提高了4倍，针对复杂的遥感图像数据，本文方法的检索效果较其他方法表现出色。结论 本文提出了一种以距离评价标准为核心的反馈策略，以提高检索精度，并采用多距离结合的Top-k排序方法合理筛选训练集，以提高检索速度，本文方法可以广泛应用于人脸识别和目标跟踪等领域，对提升检索性能具有重要意义。     

具有光照鲁棒的图像匹配方法

针对现有的基于局部特征的图像匹配算法对光照变化敏感、匹配正确率低等问题，提出一种具有光照鲁棒性的图像匹配算法。首先使用实时对比保留去色（RTCP）算法灰度化图像，然后利用对比拉伸函数模拟不同光照变换对图像的影响从而提取抗光照变换特征点，最后采用局部强度顺序模式建立特征点描述符，根据待匹配图像局部特征点描述符的欧氏距离判断是否为成对匹配点。在公开数据集上，所提算法与尺度不变特征变换（SIFT）算法、加速鲁棒特征（SURF）算法、"风"（KAZE）算法和ORB算法在匹配速度和匹配正确率上进行了对比实验。实验结果表明：随着图像亮度差异的增加，SIFT算法、SURF算法、"风"（KAZE）算法和ORB算法匹配正确率下降迅速，所提算法下降缓慢并且正确率均高于80%；所提算法特征点检测较慢和描述符维数较高，平均耗时为23.47 s，匹配速度不及另外四种算法，但匹配质量却远超过它们。对实时性要求不高的系统中，所提算法可以克服光照变化对图像匹配造成的影响。     

Machine learning algorithm selection for windage alteration fault diagnosis of mine ventilation system

Machine learning algorithms have been widely used in mine fault diagnosis. The correct selection of the suitable algorithms is the key factor that affects the fault diagnosis. However, the impact of machine learning algorithms on the prediction performance of mine fault diagnosis models has not been fully evaluated. In this study, the windage alteration faults (WAFs) diagnosis models, which are based on K-nearest neighbor algorithm (KNN), multi-layer perceptron (MLP), support vector machine (SVM), and decision tree (DT), are constructed. Furthermore, the applicability of these four algorithms in the WAFs diagnosis is explored by a T-type ventilation network simulation experiment and the field empirical application research of Jinchuan No. 2 mine. The accuracy of the fault location diagnosis for the four models in both networks was 100%. In the simulation experiment, the mean absolute percentage error (MAPE) between the predicted values and the real values of the fault volume of the four models was 0.59%, 97.26%, 123.61%, and 8.78%, respectively. The MAPE for the field empirical application was 3.94%, 52.40%, 25.25%, and 7.15%, respectively. The results of the comprehensive evaluation of the fault location and fault volume diagnosis tests showed that the KNN model is the most suitable algorithm for the WAFs diagnosis, whereas the prediction performance of the DT model was the second-best. This study realizes the intelligent diagnosis of WAFs, and provides technical support for the realization of intelligent ventilation.     

SFEP文本因果关系提取及其与SFN转化研究

为将系统故障演化过程(system fault evolution process，SFEP)的文本描述转化为空间故障网络(space fault network，SFN)结构，用于故障分析，本文提出SFEP文本因果关系提取方法，及其与SFN基本结构的转化方法。首先给出SFEP中事件的几种典型因果关系。随后提出因果关系与SFN基本结构的转化流程。本文方法围绕着关键字和因果关系组模式展开，通过模型的不断学习补充和丰富关键字和组模式。最终使方法具备将SFEP文本转化为SFN结构的能力。以飞机起落架故障发生过程文本为例进行了应用，实验结果表明该方法可用于SFEP文本中的因果关系分析，并得到了理想的SFN。完善的关键字和组模式有利于使用计算机智能处理SFEP的SFN。     

基于磁开关技术的静电除尘脉冲电源

为提高静电除尘器的工作效率得到陡化的脉冲,提出基于磁开关技术的脉冲供电方式。在分析了多级磁脉冲压缩网络的工作原理及给出磁开关的参数选择基础上,通过PSPICE实现了对二级磁脉冲压缩电路的仿真,仿真结果表明,磁开关可有效陡化高压高频脉冲。     

红外瓦斯传感器零点校正及温度补偿分析

针对红外瓦斯传感器探头经常受温度变化而影响测量的结果,设计采用了"交互式"的计算方法。在软件程序中实现对传感器的零点校正和温度补偿,使之提高瓦斯浓度检测精度,提高工作环境安全性。实验结果表明,测量准确性大大提高。     

工程经济学课程全过程项目参与式教学研究

以教师讲授为中心的传统教学模式无法满足工程经济学课程培养学生工程经济意识,提高学生工程素质的基本要求,因此,文章提出将全过程项目参与式教学方法应用于工程经济学课堂教学中。该方法通过精心设计教学课堂,利用多元化课堂组织形式,以一个激发学生广泛兴趣的实际项目案例贯穿教学始终,结合科学的评价考核体系,构建以学生为主体的学习过程,激发学生的参与意识和思考能力,从而培养学生的应用能力和创新精神,提高其综合素质。